What is the Function of the Calibration Equipment?
The calibration equipment stabilizes permanent magnets that serve different industrial applications. For proper functioning, the magnets should perform in a stable and consistent manner. Sometimes external conditions like temperature and other variables impact the magnetic performance. This is when it is recommended to use the calibration Equipment in Kolkata.
Magnetic Stabilization
Often the permanent magnets suffer from low loss, also called irreversible loss. If the loss is due to temperature elevation, the experts recommend thermal stabilization. On the other hand, the experts perform magnetic stabilization if the loss is due to demagnetizing stress.
Stabilization is a pre-treatment for temperature variations in the application. It is also suitable for combating the presence of demagnetized fields. Hence you can apply different methods based on your specific requirement.
Magnetic Calibration
You should realize that the variations in magnetic or flux output is unavoidable. While most applications can tolerate the normal variations, some need tight tolerances. This is when the experts perform calibration of the magnet to set an output after a partial knockdown. Occasionally, they use thermal calibration to maintain uniformity at elevated temperatures.
The calibration method addresses the variances in the magnetic flux output. It happens during the production process of permanent magnets. The magnets gain a higher tolerance range than what is normally seen with the treatment. It can also reduce the out-of-spec high magnets and brings them to an acceptable flux output.
This is why selecting the right manufacturers and equipment for this procedure is advisable. They execute the method with dexterity and proficiency. This way, they reach magnetic calibration for high output.
Different Types of Magnets
There are four categories of permanent magnets.
Neodymium Iron Boron (NdFeB)
Ceramic or Ferrite
SmCo Magnets
Alnico Magnets
2. Temporary Magnets
The temporary magnets, on the other hand, are mainly electromagnets. The experts pass electric current through the solenoid to magnetize them to establish the magnetic field. This field is strong on the inside of the coil, and the strength is proportionate to the total number of loops and current strength.
Various Applications of Industrial Magnets
You can use the industrial magnet in the following areas –
Assembling process
Welding
Mining
Automotive industry
You should buy high-quality industrial magnets from a reputable industrial equipment manufacturer in Kolkata. The experts perform magnetic calibration as per the project requirement. This is done keeping in mind the industrial standards and mentioned guidelines.
